DBX DriveRack PA+ Loudspeaker Management System
₦145,000
- Linked Stereo DSP Processing for ease of use
- 2-Channel XLR Input and 6-Channel XLR Output
- 2×3, 2×4, 2×5, 2×6 Crossover Configurations
- Dual 28-band Graphic EQ- Linked or Dual Mono
- Stereo Multi-band Parametric EQ
Description
Showcasing all the features that users around the world have come to expect, including easy setup, rock-solid reliability and unparalleled sound quality, this version of DriveRack has gone to great lengths to earn its “plus.” With more settings, more control and enhanced circuitry, the sound you seek is right at your fingertips.
Although the DriveRack PA+ is loaded with functions and features, it is easy to set-up and use. The dbx exclusive Set Up Wizards walk you through system set up with easy to follow step-by-step instructions. Just pick your speakers and amps from the built-in list on the PA+ and then let the Auto Level Wizard™ fine tune the level settings of each speaker. You can then let the Auto EQ® Wizard help you further optimize your sound.
Finish up by using the AFS Wizard, which automatically sets filters to eliminate any feedback during performances. Within minutes, your system will sound like it was tuned by a pro! No experience required. Get the most out of your PA with the DriveRack PA+, the worldwide standard in loudspeaker management.
Features
- Setup Wizard Steps Through Speaker and Amp Selection and Levels
- Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
- AFS™ Wizard Helps Eliminate Feedback
- Stereo Feedback Elimination with 12 feedback notch filters
- dbx 120A Sub-harmonic Synthesizer
- Classic dbx Input Compression
- JBL® Speaker and Crown® Power Amp Tunings included
- Full time RTA function
- Front-Panel Output Mutes
- Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
- Linked Stereo DSP Processing for ease of use
- 24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
- 2-Channel XLR Input and 6-Channel XLR Output
- 2×3, 2×4, 2×5, 2×6 Crossover Configurations
- Dual 28-band Graphic EQ- Linked or Dual Mono
- Stereo Multi-band Parametric EQ
- Stereo Output Limiters
- Output Alignment Delay
What's in the box
| Input | (2) line inputs. (1) RTA Mic input |
| Input Connectors | (2) Female XLR line inputs. XLR RTA Mic input |
| Input Type | Electronically balanced/RF filtered |
| Input Impedance | >40k ohm |
| Max Input | >+20dBu |
| CMRR | > 45dB |
| Mic Preamp Phantom Power | +15VDC (RTA) |
| Mic Preamp Equivalent Input Noise (EIN) | < -117dB, 22Hz-22kHz, 150 ohm (RTA) |
| Output | (6) Line Outputs |
| Output Connectors | Male XLR |
| Output Type | Electronically balanced, RF filtered |
| Output Impedance | 120ohm |
| Max Output | +20dBu |
| Alignment Delay | 10ms per channel (60ms total) |
| A/D Converter | dbx Type IV™ Conversion System |
| A/D Dynamic Range | 110 dB A-weighted, >107 dB weighted |
| Type IV Dynamic Range | 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW |
| Sample Rate | 48kHz |
| D/A Dynamic Range | 112 dB A-weighted, 110dB unweighted |
| Dynamic Range | >110 dB A-weighted, >107dB unweighted |
| THD+Noise | 0.004% typical at +4dBu, 1kHz, 0dB input gain |
| Frequency Response | 20Hz – 20kHz, +/- 0.5dB |
| Interchannel Crosstalk | < -110 dB, -120dB typical (input-to-output: < -100 dB) |
| Operating Voltage | 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz |
| Power Consumption | 25 W |
| Unit Weight | 5.5 lbs. (2.5 kg) |
| Shipping Weight | 7 lbs. (3.18 kg) |
| Dimensions | 1.75" (4.4cm) H x 5.75"(14.6cm) D x 19" (48.26cm) W |
Only logged in customers who have purchased this product may leave a review.
Reviews
0.0 Average Rating Rated ( 0 Review )
There are no reviews yet.