No products in the cart.
Proel
(see all)
- Connectors: PROEL S4CPRO – XLR3MVPRO
- Unbalanced
- Cable: HPC225
- 5 meters
- Colour: Black
- The new nylon base is foldable for an easy transport
- Anti-skid natural rubber footcap new design.
- New nylon clutch-style height adjustment.
- New nylon swivel joint for a perfect adjustment.
- The nylon boom grants a perfect adjustment of the tube.
- Length 3m
- Mini jack – 2 x jack
- Y cable
BULK200 mono Jack M – F 3pin XLR microphone cable unbalanced. Jack mono 6.3 mm – 3pin XLR F. Nickel-plated connectors PROEL type S4CPRO / XLR3FVPRO. The length 10meters.
- Length: 20 m
- XLR h – XLR m
- Balanced
- A flexible and innovative 2-tier column-style professional keyboard stand
- Both tiers are height adjustable from 10″-44″ and can hold up to 20kg. each
- Microphone attachment at the top accommodates any standard microphone boom
- All 4 arms and 3 legs fold into the extruded aluminum base for easy transportation
- Integrated cable management system keeps your setup neat and organized
- High Quality Low noise
- Pure copper flexible cable
- Create mic & Audio, VIDEO
- For good vocal sound
- Can Connect for Mixer, Power Amplifier,
- Active speaker Amply Keyboard speaker, etc.
- For Karaoke Music & Audio is good
- High-quality balanced coaxial microphone cable
- strong and flexible winding Characteristics
- flexible polyvinyl chloride with a diameter of 6.00 mm
- suitable for a wide range of DJ systems
- offers height and width adjustment.
- covered with adhesive foam to protect the surface of the apparatus in use and to give greater grip / stability
- Equipped with nr. 2 clamps for mounting on flight case or table
- includes brackets for use in support.
- suitable for a wide range of DJ systems
- Made of black painted steel
- offers height and width adjustment
- nr. 2 clamps for mounting on flight case or table
- suitable for supporting small accessories and / or additional audio equipment
- Provides clean and hum-free +48v power supply for all condenser microphones
- Suitable for all applications where +48v power supply is not available from mixing console (direct recording to pc, use of devices with no phantom power, fixed installations, etc.)
- Powered by dc adaptor (included)
- Stackable aluminum shell
- The new nylon base is foldable for an easy transport
- Anti-skid natural rubber footcap new design.
- New nylon clutch-style height adjustment.
- New nylon swivel joint for a perfect adjustment.
- The nylon boom grants a perfect adjustment of the tube.
Proel SPB30 is a pack of 6x Balanced Cables 30cm long with 6.3mm Jack connectors, ideal for Patch-Bay or for close connections.
– Total length from tip to tip: 30 cm
– 6x assorted colors: Black, Blue, Green, Red, Yellow, White.
- Connectors: 2x 6.3mm Proel S290 mono jack
- Cable: Proel HPC110
- Black colour
- Length: 10m
BULK200 mono Jack M – F 3pin XLR microphone cable unbalanced. Jack mono 6.35 mm – 3pin XLR F. Nickel-plated connectors PROEL type S4CPRO / XLR3FVPRO. The length 5 meter.
- Length: 10 m
- XLR h – XLR m
- Balanced
- Extremely light-weight and portable Monitor
- Provides a perfect sound intelligibility
- Provide a perfect alignment in the emission of high and low frequencies
- Favorite choice for vocals, guitar, horns and electronic instruments
- A high-power monitor for DJs.
- 16 mic channels with 3-band sweepable mid-range EQ and 4 Aux sends + 2 channels for mic and stereo line inputs with 4-band EQ
- Outputs: main, control room, mono out, group 1-4, aux 1-4, headphone, USB I/O
- Double effects processors with halls, rooms, plates, chorus, flanger + combi reverb & delay
- 9-band stereo assignable graphic equalizer”
- Dual Proel low frequency drivers with a 64 mm (2.5 in) diameter edge-wound ribbon voice coil
- Ferro-fluid cooled compression driver with titanium diaphragm
- The advanced network topology crossover design
- A “Quasi 3-Way” design
- High-voltage capacitors and inductors with massive cores and heavy gauge wire
- Progressive Transition™ highfrequency waveguide
- The rugged, acoustically superior enclosure
- SonicGuard™
- Non-resonant, all-steel handles are used.
- Attractive 18-gauge perforated, steel grille protects components from damage.
- Quality Professional Headphones
- Extended Response
- 57mm Drivers
- 2m Cable
- Includes 3.5mm Jack with 6.3mm Adaptor
- Dm12 bass drum microphone (1pc)
- Dm1 snare/tom drum microphone (4pcs)
- Cm602 overhead condenser microphone (3pcs)
- Apm47 drum mic clips (4pcs)
- Nominal Impedance: 8 ohm
- Input power rating (continuous):50
- Input power rating (peak):100
- Sensitivity: 91 dB @ 1W/1m
- Low Frequency Device: 8” woofer
- System type: 2-way enclosure
- Nominal Impedance: 8 ohm
- Input power rating (continuous):50
- Input power rating (peak):100
- Frequency response: 75 Hz – 20 kHz
- Sensitivity: 91 dB @ 1W/1m
- Low Frequency Device: 8” woofer
- 40bit floating point resolution CORE DSP
- 24bit AD/DA converters
- 110dB dynamic range
- 28 bands of GRAPHIC EQ on each INPUT
- 3 bands of DYNAMIC EQ on each INPUT
- Application fields : Live installations, Recording studios, Home studios
- NOMINAL INPUT FREQUENCY: 50/60 Hz
- Input voltage range : 230 V
- Output voltage : 230 V ± 4%
- Output current : 10 A